Winterizing

How to Winterize a Kawasaki Jet Ski (Ultra, STX)

Kawasaki's storage procedure leaves the fuel tank empty, not full. Here's what its owner's manuals say for the STX 160 and the 2026 Ultra 310LX.

By Alex Quinn 23 min read

Jet ski on a trailer in a snowy backyard under a gray and black AllGuard Weatherproof Shield cover

Knowing how to winterize a Kawasaki jet ski starts with one instruction that sets Kawasaki apart: its owner's manuals have you drain the fuel tank before storage. Yamaha's 2026 owner's manuals say to top off the tank with fresh gasoline and add Yamalube fuel stabilizer (its 2021 Maintenance Matters guide says 7/8 full), and BRP says to fill a Sea-Doo's tank completely, so fuel advice written for those brands doesn't carry over. This guide follows Kawasaki's own storage procedures for the STX 160 (2022 and 2026 manuals) and the supercharged Ultra 310LX (2026 manual); older two-strokes have their own manuals. Where your manual says something different, follow your manual.

Every Kawasaki manual we read, from 1999 to 2026, uses the same trigger: "During the winter, or whenever your watercraft will not be in use for more than 30 days, proper storage is essential." Each one then gives you two routes: see your Kawasaki dealer for the service, or do the steps yourself. For the version that covers Sea-Doo and Yamaha too, see our guide to winterizing a jet ski. If you're not sure your ski needs it, start with do you have to winterize a jet ski.

Start with the right Kawasaki owner's manual

Kawasaki's storage steps aren't the same for every model. Each owner's manual has its own Preparation for Storage section, and the steps change with the hull and engine: the 2026 STX 160 manual has you take off the handrail plate to reach the bilge hoses, and the 2026 Ultra 310LX manual adds supercharger and intercooler steps. Kawasaki's Owner Center lists owner's manuals by model year and model, with a VIEW MANUAL link to an online copy, and the 2026 manuals note that updated information is available in the online version on Kawasaki's website.

These are the manuals behind this guide. If yours isn't among them, use the steps below to know what to look for, then follow your own manual's storage section.

Kawasaki owner's manuals used for this guide, viewed on Kawasaki's Owner Center on 2026-10-27. Model coverage is from the Owner Center's model list for each year. Other models and years have their own manuals.
Owner's manualModels it coversItem numberStorage pages
2022 STX 160 (JT1500R/S/T)STX 160, STX 160X, STX 160LX99803-0202pp. 120-126
2026 STX 160 (JN1500F/H)STX 160LX, STX 160X99814-0205pp. 146-154
2026 Ultra 310LX (JV1500A/B)Ultra 310LX, Ultra 310LX-S99814-0202pp. 154-161
2002 900 STX (JT900-C2)900 STX (two-stroke)99987-1095pp. 83-88
1999 1100 STX (JT1100-B2)1100 STX (two-stroke)99920-1879-01pp. 78-82

What you'll need, per Kawasaki's manuals

Gather these before you start. The list follows the storage steps in the manuals above.

  • A garden hose with a screw-in fitting for the flush port
  • A way to blow air through the bilge hoses to force the water out
  • A siphon or pump to drain the fuel tank, and a container to take the old gasoline to a recycling center
  • About 10 liters (2.6 US gallons) of fresh gasoline
  • Engine oil for the oil change (your manual's maintenance chapter has the procedure)
  • Fogging oil, and a socket to remove the spark plugs
  • Molybdenum disulfide grease for the spark plug threads on the STX 160, plus grease for the plug caps and marine grease for the ignition connectors
  • Baking soda and water to clean the battery case, grease for the terminals, and a charger that can give a slow charge of one ampere or less
  • A penetrating rust inhibitor for exposed metal parts, and a mild detergent for washing
  • 10 mm (half-inch) spacers if you'll prop the seats up rather than remove them (2022 STX 160)
  • A cover suited to where the ski will spend the winter

How to winterize a Kawasaki STX 160, step by step

These steps follow the Preparation for Storage section of Kawasaki's 2022 STX 160 owner's manual (item 99803-0202) and its 2026 STX 160LX/160X manual (item 99814-0205). The two procedures are nearly identical; where they differ, both versions are given. The cooling and bilge procedures are covered in more detail in the next sections.

Kawasaki STX 160 storage, step by step

  1. Step 1: Flush the cooling system

    Both STX 160 manuals begin storage with the cooling system. Connect a garden hose to the flush port, start the engine before you turn on the water, let it idle for several minutes, then shut the water off with the engine still idling and rev it a few times to clear the water out of the exhaust. The full procedure is in the cooling section below.

  2. Step 2: Wash and drain the engine compartment

    Wash the engine compartment with fresh water, remove the drain screws in the stern so the water runs out, and wipe up whatever is left in the compartment.

  3. Step 3: Blow the water out of the bilge hoses

    Flush the bilge system, then, before you reconnect the hoses to the plastic breather fitting, blow air through them to force all the water out. The 2022 manual's storage section lists this step for storage in an area where the temperature drops below freezing, and has you remove the rear inside storage case for access. The 2026 manual has you remove the seats, the handrail plate and the rear air ducts first, and gives torque values for refitting them.

  4. Step 4: Change the engine oil

    Both manuals include an oil change in the storage procedure and send you to the maintenance chapter for how to do it.

  5. Step 5: Drain the tank, run fresh fuel through, drain it again

    Work with the lanyard key off the stop button, no smoking, in a well-ventilated area away from any flame or spark, including appliances with a pilot light. Lift the stern a little so the fuel and water at the bottom of the tank flow toward the filler, and drain the tank completely with a siphon or pump. Kawasaki says not to discard the gasoline but to take it to an authorized recycling center. Refill with about 10 liters (2.6 US gallons) of fresh fuel, then start the engine and run it in 15-second periods, waiting five minutes between each, until fresh fuel has replaced the fuel in the fuel system. Then drain the tank again and leave the filler cap loose to prevent condensation in the tank. The 2022 manual also has you inspect and clean the fuel pump screen.

    Red fuel can and a hand siphon pump on a garage floor, with a jet ski on its trailer in the driveway behind
  6. Step 6: Fog the cylinders

    Disconnect the two connectors on the primary ignition cables, remove the spark plugs, spray fogging oil directly into each cylinder and turn the engine over several times with the start button to coat the cylinder walls. Don't lean over the engine: Kawasaki warns that an air and oil mist is forcibly ejected from the plug holes and could injure your eyes. Put molybdenum disulfide grease on the plug threads, reinstall the plugs and tighten them to 13 N·m (115 in·lb). Grease the plug caps, refit them, and reconnect the ignition connectors with marine grease on them, matching the leads marked 2 and 3.

    Four spark plugs in a row on a gray shop towel beside an unlabeled aerosol can
  7. Step 7: Remove and look after the battery

    Take the battery out and clean the case with a solution of one heaping tablespoon of baking soda in a cup of water, then rinse it. Never remove the sealed cap, which Kawasaki says can damage the battery. Coat both terminals with grease and store the battery in a cool, dry place where it won't be exposed to freezing temperatures. During storage, give it a slow charge of one ampere or less about once a month, and keep it well charged, especially in cold weather.

  8. Step 8: Book two jobs with a dealer

    Both manuals have you tighten all the engine mount bracket bolts and recommend that an authorized dealer does it, because it requires special tools. They also have your Kawasaki dealer inspect the jet pump bearings and seals on the maintenance schedule, and say the bearings should be serviced before any prolonged storage so that water left in the pump can't corrode them.

  9. Step 9: Clean, protect, ventilate and cover

    Wash the exterior and dry it thoroughly, using only a mild detergent in water, since harsh solvents may attack the surface or smear the colors. Lightly spray all exposed metal parts with a penetrating rust inhibitor and carry out the lubrication procedures in your manual. For ventilation, the 2022 manual says to remove the seats or prop them up on 10 mm (half-inch) spacers; the 2026 manual says to remove the seats and open the inspection vent hatch. Then cover the craft and store it in a clean, dry place.

Important

15 seconds out of the water, at most

Every Kawasaki manual we read says not to run the engine with the watercraft out of the water for more than 15 seconds at a time, and each one also says not to run it at maximum speed out of the water. Flushing is the longer run: the 2026 manuals have you connect a garden hose and let the engine idle for several minutes with the water running. They warn that overheating can damage the engine and exhaust system. The storage fuel step stays inside that limit: 15-second runs with five minutes between them.

Kawasaki's fuel rule: drain the tank, don't fill it

Kawasaki's manuals treat a short layup and storage differently. For 30 to 60 days without use, the 2022 STX 160 manual and both 2026 manuals say to mix a fuel stabilizer with the gasoline in the tank, explaining that stabilizer additives inhibit oxidation of the fuel, which minimizes gummy deposits. For storage, the same page says: "Before storage it is recommended that you drain all fuel from the fuel tank and fuel system." The storage section then does it in three moves: drain the tank, run about 10 liters (2.6 US gallons) of fresh fuel through in 15-second bursts until it has replaced the fuel in the system, and drain the tank again with the filler cap left loose to prevent condensation.

This is the step most likely to clash with advice from other brands. Yamaha's 2026 owner's manuals say to top off the tank with fresh gasoline and add Yamalube fuel stabilizer, its 2021 Maintenance Matters guide says to store a WaveRunner with the tank 7/8 full to limit condensation, and BRP says to fill a Sea-Doo's tank completely. If a guide tells you to fill the tank, follow your owner's manual instead: for the Kawasakis in this guide, that means a drained tank. In spring, the manuals' removal-from-storage steps have you fill the tank and close the filler cap securely; our de-winterizing guide covers the rest of the spring checks.

Flushing and draining Kawasaki's cooling system

Kawasaki's spec pages for the STX 160X and Ultra 310LX list the cooling system as "Inducted water", and its manuals say that "engine cooling water is supplied by the jet pump." In plain terms, the engine is cooled with water the jet pump takes in; "open-loop" is our shorthand for that, not Kawasaki's term. Every storage section we read starts by cleaning that cooling system, and the 2022 and 2026 STX 160 manuals and the 2026 Ultra 310LX manual describe the same flush:

  1. Connect a garden hose with a screw-in fitting to the flush port (on the STX 160, remove the port's cap first). On the STX 160 the auxiliary water supply port is under the rear seat; on the 2026 Ultra 310LX the flushing ports are at the stern.
  2. Start the engine and let it idle before you turn on the water. Kawasaki warns that water turned on before the engine is running may flow back through the exhaust pipe into the engine and cause severe engine damage.
  3. Turn on the water right away and adjust the flow until a little trickle comes out of the bypass outlet on the right side of the hull.
  4. Let the engine idle for several minutes with the water running.
  5. Turn off the water and leave the engine idling, then rev it a few times to clear the water out of the exhaust system.
  6. Switch off the engine and remove the hose. The 2022 STX 160 manual adds: reinstall the cap securely.

Kawasaki says the procedure expels excess water from the exhaust system and helps prevent premature wear from internal engine corrosion, along with the buildup of salt or other mineral deposits that can block the cooling system and cause overheating. The manuals also call for it after each use in salt water. Don't run the engine without cooling water flowing for more than 15 seconds.

The bilge system gets its own flush. Disconnect the bilge hoses at the plastic breather fittings in the engine compartment, flush the bilge filter hose for about a minute and the other hose for several minutes, and remove the stern drain screws to drain the compartment. Before you reconnect the hoses, check that the small breather hole in each fitting is clear; Kawasaki warns that if it's clogged, the engine compartment will fill with water when the engine stops or idles. For storage, blow air through both hoses to force the water out. The 2022 STX 160 manual's storage section lists that blow-out under storage in an area where the temperature drops below freezing, though its bilge-flushing section says to do it if the watercraft is to be stored; the 2026 STX 160 and Ultra 310LX manuals, like the 1999 and 2002 ones, include it in the storage steps without a freezing condition.

Does a Kawasaki jet ski need antifreeze?

The Kawasaki manuals we read don't call for it. None of the five storage sections in this guide includes an antifreeze step, and a text search of the online 2022 STX 160, 2026 STX 160 and 2026 Ultra 310LX manuals finds no mention of antifreeze or coolant. What their storage steps do is get water out: flush the cooling system, rev the engine to clear the exhaust, drain the engine compartment through the stern drain screws and blow the water out of the bilge hoses. The battery comes out and goes somewhere it won't be exposed to freezing temperatures.

If you've read that every jet ski needs RV antifreeze, that step isn't in the Kawasaki procedures above. If your own manual, or your Kawasaki dealer, calls for antifreeze on your model, follow that. For how Sea-Doo and Yamaha handle it, see the antifreeze comparison in our main winterizing guide.

Winterizing a Kawasaki Ultra 310 (supercharged)

The Ultra 310 is Kawasaki's supercharged Ultra. Its spec sheet for the 2026 Ultra 310LX lists a 1,498 cc in-line four-cylinder engine that is "supercharged and intercooled". Kawasaki's 2026 Ultra 310LX owner's manual (JV1500A/B, item 99814-0202) follows the STX procedure for the cooling system, fuel, oil, fogging, battery and cleaning, with these additions and differences:

  • Oil the supercharger at the end of each day's use. Kawasaki warns that moisture in the air drawn through the supercharger can condense after the engine is stopped and left for long periods, often leaving mineral deposits on internal parts that may lead to supercharger lock-up, particularly if the craft has been used in salt water. Its procedure: remove the front seat and the filler opening cap, start the engine and let it idle, apply commercially available fogging oil to the supercharger through the filler opening for 10 seconds, then stop the engine and refit the parts.
  • Before storage, the supercharger goes to a dealer. Under Preparation for Storage, the manual sends the craft to an authorized dealer to check the supercharger drive belt for wear or damage and to apply corrosion protection coating to the supercharger rotors. Its maintenance chapter adds: "Have your authorized dealer service them in accordance with the Maintenance Chart and Preparation for Storage."
  • Flush the intercooler as well. The intercooler has its own flushing port at the stern, beside the engine flushing port. Connect the garden hose to it and turn on the water; the manual notes that you don't need to start the engine to flush the intercooler.
  • Spark plugs and access. After fogging the cylinders, the Ultra manual says to spray the spark plugs with fogging oil before reinstalling them, where the STX 160 manuals use molybdenum disulfide grease on the threads. Reaching the bilge hoses means removing the engine cover, the JETLINK ECU bracket bolts and the rear air duct. For ventilation in storage, remove the seats and open the inspection vent hatch.

Those steps come from the 2026 manual. Earlier Ultra 310 model years have their own owner's manuals, so check your Ultra 310 owner's manual for the supercharger procedure that applies to your year.

Older two-stroke Kawasakis: 900 and 1100 models

This guide covers current models. Kawasaki's older two-stroke 900 and 1100 models, such as the 1999 1100 STX and the 2002 900 STX, have their own owner's manuals with different fuel and fogging steps, so follow the manual for your model and year, or ask a Kawasaki dealer. Some older manuals listed on Kawasaki's Owner Center didn't open online when we tried them; a dealer can help if yours won't load.

Do it yourself or book a Kawasaki dealer?

Kawasaki leaves the choice to you, within limits. Every storage section we read tells you to see your Kawasaki dealer for the service or do the steps yourself. Even in the newer manuals' do-it-yourself lists, some jobs point to the dealer: the engine mount bracket bolts (special tools), the jet pump bearing and seal inspection, and on the Ultra 310LX, the supercharger belt check and rotor coating.

The 2026 manuals are more cautious about home maintenance in general than the 2022 one. The 2022 STX 160 manual says that with a basic knowledge of mechanics and the proper use of tools, you should be able to carry out many of the items in its maintenance chapter. The 2026 STX 160 and Ultra 310LX manuals say that, apart from the pre-ride check and the end-of-the-day checklist, the maintenance and repair work they describe should be done by qualified technicians, and that Kawasaki doesn't recommend doing it without knowledge and proper tools.

Kawasaki's own limited warranty is the other factor. The warranty section of the 2026 STX 160 manual says: "You can also do your own maintenance work if you have the proper tools, service references, and mechanical skills. However, if a failure is found to be caused by improper servicing, it would not be covered by the limited warranty." Whoever does the work, it asks you to record each service in the manual's Maintenance Record section and keep the receipts.

Covering a winterized Kawasaki for storage

Every Kawasaki manual we read includes the same line in its storage steps: "Cover the watercraft and store it in a clean, dry place." Ventilate first. The 2022 STX 160 manual has you remove the seats or prop them up on 10 mm (half-inch) spacers, and the 2026 manuals have you remove the seats and open the inspection vent hatch, in both cases, Kawasaki says, to aid air circulation and prevent condensation from forming.

A cover doesn't keep the footwells dry on its own. Kawasaki warns that a craft left outside, even covered, can collect water in the footwells on either side of the seat, and that water left there can make the paint bubble and peel and the mat peel off the deck. If the ski spends the winter on its trailer, the manuals say to raise the trailer tongue so the water can't collect. And don't store it afloat: the manuals say Jet Ski watercraft aren't designed to be docked in the water for extended periods and tell you not to leave the craft in the water overnight. For where to keep it, see jet ski winter storage.

Kawasaki sells its own covers; its UK site, for example, lists a Vacu-Hold cover for the Ultra 310, built around what it calls a patented vented trailering system. Our covers are sized by the craft's overall length rather than by model name. For a ski that winters outdoors or on its trailer, the Weatherproof Shield is made of 600D solution-dyed polyester with a PU coating and is water-resistant. It has an elastic hem cord, built-in buckles and straps, air vents to aid trailering, an extra strap set and a mesh storage bag. Our guide to Kawasaki jet ski covers goes into more detail.

Trailerable Cover

AllGuard Weatherproof Shield Jet Ski Cover (Trailerable)

For a Kawasaki that winters outdoors or on its trailer: 600D PU-coated polyester, water-resistant, with built-in buckles and straps. Sized by overall length.

4 colors: Blue / Black, Gray / Black, Red / Black, Yellow / Black

  • Under 90 inP0
  • Under 102 inP1
  • Under 115 inP2
  • Under 125 inP3
  • Under 135 inP4
  • Under 145 inP5
  • Up to 160 inP6

Lifetime Warranty

Which size fits your Kawasaki

Kawasaki's spec pages list the overall length of the models below. Here's where some of them land in our sizes; a length within an inch of a size line means measure your own craft to confirm.

Published Overall Lengths and the Matching Cover Size
ModelOverall LengthTrailerable SizeIndoor SizeSource
Kawasaki STX 160X2027 130.3 in P4 PWC3 Spec page for the Kawasaki STX 160X on kawasaki.com (opens in a new tab)
Kawasaki STX 160LX2027 134.6 in P4Measure to confirm PWC3 Spec page for the Kawasaki STX 160LX on kawasaki.com (opens in a new tab)
Kawasaki Ultra 310LX2026 140.9 in P5 Over 138 in Spec page for the Kawasaki Ultra 310LX on kawasaki.com (opens in a new tab)
Kawasaki Ultra 160LX2027 140.9 in P5 Over 138 in Spec page for the Kawasaki Ultra 160LX on kawasaki.com (opens in a new tab)
Kawasaki SX-R 160 (stand-up)2027 104.5 in P2 Ask Us About the Satin Shield for This Model › Spec page for the Kawasaki SX-R 160 (stand-up) on kawasaki.com (opens in a new tab)

Lengths are the manufacturers' published figures. Your measured length is what counts, and "measure to confirm" marks lengths within 1 in of a size line.

For a garage or other indoor storage, the Satin Shield is our stretch cover in 85% polyester and 15% spandex with a sheared fleece interior, made for indoor use only. A satin storage bag is included. Its larger size, PWC3, is for craft up to 138 inches long, which takes in the STX 160 models above but not the 140.9-inch Ultras; for an Ultra, use the Weatherproof Shield indoors as well. The jet ski cover size guide shows how to measure, and you can browse covers for Kawasaki models or every cover we make.

Jet ski on its trailer in a garage under a black AllGuard Satin Shield indoor cover

Storing it in the garage?

The Satin Shield is our indoor stretch cover, for craft up to 138 inches long.

See the Satin Shield

Kawasaki winterizing checklist

Run through this before you close the garage or walk away from the trailer, and leave a note on the handlebars listing anything to undo in spring.

Before you put a Kawasaki away for winter

Kawasaki winterizing FAQ

Yes, according to Kawasaki's owner's manuals. The 2022 and 2026 STX 160 and 2026 Ultra 310LX manuals have you drain the tank with a siphon or pump, refill with about 10 liters (2.6 US gallons) of fresh fuel, run the engine in 15-second bursts until that fuel has replaced the fuel in the system, then drain the tank again and leave the filler cap loose to prevent condensation. Yamaha's 2026 manuals say to top off the tank (its 2021 Maintenance Matters guide says 7/8 full) and BRP says to fill a Sea-Doo's tank completely, so go by your own manual.

Sources

  1. JET SKI STX 160 Owner's Manual, JT1500R/S/T (2022), item 99803-0202: Fuel Requirements p. 61; Operating Instructions pp. 116-118; Transporting and Storage pp. 120-126; Maintenance and Adjustments pp. 127, 162-165 (opens in a new tab)Kawasaki Motors Corp., U.S.A. (manual by Kawasaki Heavy Industries) · 2022 model year; viewed online 2026-10-27
  2. JET SKI STX 160LX / 160X Owner's Manual, JN1500F/H (2026), item 99814-0205: Fuel Requirements p. 86; Storage pp. 143-154; Maintenance pp. 155, 187-189; Warranty p. 203 (opens in a new tab)Kawasaki Motors Corp., U.S.A. (manual by Kawasaki Heavy Industries) · 2026 model year; viewed online 2026-10-27
  3. JET SKI Ultra 310LX / 310LX-S Owner's Manual, JV1500A/B (2026), item 99814-0202: Fuel Requirements p. 93; Storage pp. 150-161; Maintenance p. 162; Supercharger p. 166; Cooling System Flushing pp. 194-196 (opens in a new tab)Kawasaki Motors Corp., U.S.A. (manual by Kawasaki Heavy Industries) · 2026 model year; viewed online 2026-10-27
  4. JET SKI 900 STX Owner's Manual, JT900-C2 (2002), item 99987-1095: Specifications p. 10; Storage pp. 83-88; Cooling System Flushing p. 107 (opens in a new tab)Kawasaki Motors Corp., U.S.A. (manual by Kawasaki Heavy Industries, 2001) · 2002 model year; viewed online 2026-10-27
  5. JET SKI 1100 STX Owner's Manual, JT1100-B2 (1999), item 99920-1879-01: Specifications pp. 8-9; Storage pp. 78-82 (opens in a new tab)Kawasaki Motors Corp., U.S.A. (manual by Kawasaki Heavy Industries) · 1999 model year; viewed online 2026-10-27
  6. Owner's & Service Manuals (Owner Center) (opens in a new tab)Kawasaki Motors Corp., U.S.A. · retrieved 2026-10-27
  7. 2026 Jet Ski Ultra 310LX (specifications) (opens in a new tab)Kawasaki Motors Corp., U.S.A. · retrieved 2026-10-27
  8. 2027 Jet Ski STX 160X (specifications) (opens in a new tab)Kawasaki Motors Corp., U.S.A. · retrieved 2026-10-27
  9. 2027 Jet Ski STX 160LX (specifications) (opens in a new tab)Kawasaki Motors Corp., U.S.A. · retrieved 2026-10-26
  10. 2027 Jet Ski Ultra 160LX (specifications) (opens in a new tab)Kawasaki Motors Corp., U.S.A. · retrieved 2026-10-26
  11. 2027 Jet Ski SX-R 160 (specifications) (opens in a new tab)Kawasaki Motors Corp., U.S.A. · retrieved 2026-10-26
  12. Vacu-Hold Jet Ski Cover (Ultra 310) (opens in a new tab)Kawasaki Motors UK · retrieved 2026-10-27
  13. Maintenance Matters (opens in a new tab)Yamaha Motor Corporation, USA · retrieved 2026-10-26
  14. Yamaha WaveRunners 2021 Maintenance Matters Guide (opens in a new tab)Yamaha Motor Corporation, USA · 2021
  15. 2026 WaveRunner VX-C/VX/VX Deluxe/VX Cruiser/VX Limited Owner's/Operator's Manual, U.S.A. Edition (LIT-18626-15-77): Care and storage (opens in a new tab)Yamaha Motor Corporation, U.S.A. · 2026 model year; viewed 2026-10-27
  16. How to Winterize Your PWC (opens in a new tab)BRP (Sea-Doo) · 2026-06-09

Find Your Size

Measure your jet ski bow to stern in a straight line, then enter the length in inches.

  1. Under 90 inP0
  2. Under 102 inP1
  3. Under 115 inP2
  4. Under 125 inP3
  5. Under 135 inP4
  6. Under 145 inP5
  7. Up to 160 inP6
Full Size Guide

In inches. Decimals are fine.

Covers for Your Jet Ski

All Covers