AllGuard Weatherproof Shield
Outdoor storage and trailering
$139.99
Lifetime WarrantySizing
Kawasaki's spec pages give an overall length for the Ultra, STX, ST and SX-R models below, and for our covers that one number picks the size. Here's how the Ultra, STX, ST and SX-R map to sizes, where to measure to confirm, and what Kawasaki's own manuals and covers say.
Our covers for a Kawasaki jet ski go by one number: the craft's overall length, bow to stern. Kawasaki publishes that length for the models below, and on Kawasaki's pages the lineup splits by family. Kawasaki lists the 2026 Ultra 310LX and the 2027 Ultra 160LX at 140.9 in, which is size P5; the 2027 STX models at 130.3 to 134.6 in, which is P4; the 2027 ST 160 at 124.1 in, a P3; and the 2027 SX-R 160 stand-up at 104.5 in, a P2.
Two things make the model year and your own tape measure matter. Two of those lengths sit within an inch of a size line, and so does the MY2022–2025 Ultra 310X's. And Kawasaki's own spec sheets show the Ultra's length changing across model years, from 132.7 in on the MY2020–2021 sheets to 140.9 in on the current pages. Below: sizes by family (the full model list is on our Kawasaki jet ski covers page), the boundary models, the Ultra by year, older Kawasakis, which models the indoor Satin Shield fits, what Kawasaki's 2026 owner's manuals say about covers and trailering, and how Kawasaki's own Vacu-Hold covers are matched.
Note
Kawasaki's figures, your craft
Every length here is Kawasaki's published overall length for the model and model years named, from Kawasaki's trim pages and spec sheets. Our size guide says the manufacturer's spec sheet lists the overall length and to use it to double-check your tape measure. The owner's-manual quotes on storage and trailering come from Kawasaki's 2026 STX 160LX/160X and Ultra 310LX/310LX-S owner's manuals; for any other model or year, follow your own owner's manual.
Our Kawasaki make page lists each model with Kawasaki's published length and the size it matches. This summary groups them by family. Weatherproof Shield sizes go by length: P2 is 102 to 115 in, P3 is 115 to 125 in, P4 is 125 to 135 in and P5 is 135 to 145 in. Indoor Satin Shield sizes are in their own section below.
| Models | Model years | Kawasaki overall length | Weatherproof Shield size |
|---|---|---|---|
| Ultra 310LX, Ultra 310LX-S | MY2026 | 140.9 in | P5 |
| Ultra 160LX, 160LX-S, 160LX Adventure, 160LX-S Wakesport | MY2027 | 140.9 in | P5 |
| Ultra 160LX-S Angler | MY2025 | 140.9 in | P5 |
| STX 160X, STX 160R, STX 310R, STX 310RX | MY2027 | 130.3 in | P4 |
| STX 160LX, STX 160LX-S | MY2027 | 134.6 in | P4 (0.4 in under the P5 line: measure to confirm) |
| ST 160, ST 160X | MY2027 | 124.1 in | P3 (0.9 in under the P4 line: measure to confirm) |
| SX-R 160 (stand-up) | MY2027 | 104.5 in | P2 |
The SX-R 160 is a stand-up, and it sizes by length like any other craft: at 104.5 in it is a P2. Our size guide says the current stand-up models it lists all measure over 90 in, so they fall in P1 or P2. Kawasaki's archived 2022 page gives the earlier SX-R (1500) the same 104.5 in.
Some Kawasakis aren't in the table. Our data has no published length yet for the 2026–2027 Ultra 310X or the SX-X 160 stand-up, and it has STX 160 lengths for MY2027 only. For any of those, measure the craft bow to stern, check it against Kawasaki's spec sheet for your year, and match it in the size guide.
Our size guide says to pick the size whose range includes your length and, within an inch of a size line, to measure again to confirm. Three Kawasaki lengths fall that close to a line:
For these, measure your own craft bow to stern before you order and let that number pick the size. Our guide to measuring a jet ski for a cover walks through it.

Kawasaki's spec sheets show the Ultra's published length changing by model year, so note the exact model and year before you look up a size.
Our size guide says your manufacturer's spec sheet lists the overall length; use it to double-check your tape measure. The table above and our Kawasaki make page give Kawasaki's published figures.
Measure the craft's overall length, bow to stern. Our measure guide shows how.
Pick the size whose range includes your length. Within an inch of a size line, as with the STX 160LX, ST 160 and MY2022–2025 Ultra 310X, measure again to confirm.
The Weatherproof Shield is the water-resistant, trailerable cover, in P0 to P6. The Satin Shield is the indoor cover, in PWC2 and PWC3, up to 138 in.
Kawasaki's spec sheets give the Ultra name more than one length, so size an Ultra by its model year, not by the name. Kawasaki's MY2020 and MY2021 spec sheets list the Ultra 310LX, Ultra LX and Ultra 310X at 132.7 in, a P4. Kawasaki's MY2022–2025 spec sheets list the Ultra 310X at 135.4 in, a P5 that sits 0.4 in over the P4/P5 line. Kawasaki's current pages list the 2026 Ultra 310LX and the 2027 Ultra 160LX models at 140.9 in, also a P5. From the 2020–2021 sheets to the current pages, that's 8.2 in longer (140.9 − 132.7 = 8.2), across the P4/P5 line.
The sources don't say why the lengths differ. Kawasaki's own cover listings vary on this hull too: Kawasaki lists two different OEM covers for the 2027 Ultra 310X, items 99994-1864 and 99994-1698, and Kawasaki UK notes that "if the 200mm longer accessory Ultra-Deck kit 99994-1704 is fitted to the Ultra 310X (JT1500X) Jet Ski, the larger protection cover 99994-1864 must be used." That's Kawasaki on its own covers. For a cover sized by length, measure your own craft.
| Model | Overall Length | Trailerable Size | Indoor Size | Source |
|---|---|---|---|---|
| Kawasaki Ultra 310LX2020 | 132.7 in | P4 | PWC3 | Spec page for the Kawasaki Ultra 310LX on kawasaki.com (opens in a new tab) |
| Kawasaki Ultra 310LX2021 | 132.7 in | P4 | PWC3 | Spec page for the Kawasaki Ultra 310LX on kawasaki.com (opens in a new tab) |
| Kawasaki Ultra LX2020 | 132.7 in | P4 | PWC3 | Spec page for the Kawasaki Ultra LX on kawasaki.com (opens in a new tab) |
| Kawasaki Ultra LX2021 | 132.7 in | P4 | PWC3 | Spec page for the Kawasaki Ultra LX on kawasaki.com (opens in a new tab) |
| Kawasaki Ultra 310X (MY2020–2021 sheets)2020–2021 | 132.7 in | P4 | PWC3 | Spec page for the Kawasaki Ultra 310X (MY2020–2021 sheets) on kawasaki.com (opens in a new tab) |
| Kawasaki Ultra 310X2022–2025 | 135.4 in | P5Measure to confirm | PWC3 | Spec page for the Kawasaki Ultra 310X on kawasaki.com (opens in a new tab) |
| Kawasaki Ultra 310LX2026 | 140.9 in | P5 | Over 138 in | Spec page for the Kawasaki Ultra 310LX on kawasaki.com (opens in a new tab) |
Lengths are the manufacturers' published figures. Your measured length is what counts, and "measure to confirm" marks lengths within 1 in of a size line.
For older Kawasakis, our data holds only a few published lengths. Kawasaki's archived 2019 STX-15F page lists an overall length of 122.8 in, which is a P3, or PWC3 indoors. Our model-lengths table carries that figure for the 2006–2019 STX-15F, checked year by year against Kawasaki's archived pages. The 2004 and 2005 STX-15F aren't in it: measure one of those and use the chart. The Ultra models on Kawasaki's MY2020–2021 spec sheets are in the table above.
We have no published lengths for the 2009–2019 Ultra 310, 300 and 260 hulls, the 900 STX and 1100 STX, the X2, the ZXi, the 750 SX or the Ultra 130, 150 and 250. Our size guide's rule covers them: older or discontinued model? Measure it and use the chart. Kawasaki's US site lists an OEM Vacu-Hold cover for the 2009–2010 STX and the STX-15F; it's in the OEM table below.
The Satin Shield is our indoor cover: black, 85% polyester and 15% stretch spandex with a sheared fleece interior, elastic front and rear hems, and reinforced pocketed grommets on the left and right sides. It comes in two sizes, PWC2 up to 117 in and PWC3 up to 138 in.
That 138 in is the limit. Kawasaki lists the 2026 Ultra 310LX and 310LX-S, the 2027 Ultra 160LX models and the 2025 Ultra 160LX-S Angler 2.9 in over it (see the family table above), so they do not fit any Satin Shield size; for those Ultras, our cover is the Weatherproof Shield in P5. By Kawasaki's published lengths, the indoor sizes run like this:
The Satin Shield is for indoor storage only. For trailering, the size goes on the trailerable Weatherproof Shield.

Indoor Cover
AllGuard Satin Shield Indoor Jet Ski Cover
Indoor stretch cover in black with a fleece interior. PWC3 (up to 138 in) fits the 2027 STX and ST 160. Not for the current Ultra 310LX or 160LX.
Color: Black
$129.99
Shop size PWC3The cover sentence in Kawasaki's 2026 owner's manuals sits in Preparation for Storage. The 2026 STX 160LX/160X and Ultra 310LX/310LX-S manuals both say: "Cover the watercraft and store it in a clean, dry place." The STX manual says when storage applies: "During the winter, or whenever your watercraft will not be in use for more than 30 days, proper storage is essential." It also gives owners a choice: "See your Kawasaki JET SKI watercraft dealer for this service or do the following." Our guide to winterizing a Kawasaki jet ski covers Kawasaki's steps.
Right before the cover line, the 2026 STX manual says: "Remove the seats and open the inspection vent hatch to insure adequate ventilation and prevent condensation from forming." It is Kawasaki's step for the craft, not a statement about any cover.
Kawasaki also says a covered craft left outside can still collect water. Its 2026 STX manual warns: "If the watercraft is left outside, even covered, water can collect in the footwells on either side of the seat." The same manual says water left in the footwells can cause the paint to bubble and peel and the mat to peel off the deck, and tells owners not to allow water to collect in the footwells during storage. For a craft left on a trailer, the 2026 STX and Ultra manuals both say to "raise the trailer tongue so that water cannot accumulate in the footwells." That is Kawasaki's instruction for its own craft; follow the owner's manual for yours.
Kawasaki's storage chapter also says its craft "are not designed to be docked in water for extended periods." It says prolonged immersion will cause the hull paint to bubble and peel and electrolytic erosion of some metal parts in the jet pump, and, to prevent this, to remove the craft from the water at the end of each day's use and not leave it in the water overnight. More on storage: jet ski winter storage and storing a jet ski outside.
The Transporting sections of Kawasaki's 2026 STX 160 and Ultra 310LX manuals say nothing about a cover. Both tell owners to "observe the trailer laws and regulations in your area" and not to use the handrail to lift the craft or attach tie-downs, as this can damage the handrail and/or hull, and both say to use only the bow and stern eyes when fastening the watercraft to the trailer. The STX manual adds: "Be sure the trailer matches with the craft's weight and hull design. Securely fasten the watercraft to prevent movement between the craft and trailer." After transporting and before starting the engine, it says to open the front hatch cover, remove the seats and open the inspection vent hatch for several minutes to ventilate the engine compartment.
Our Weatherproof Shield is sold as trailerable, and the supplier's spec lists air vents to aid trailering; those are the only trailering claims we make for it. The supplier's spec lists built-in buckles and straps but doesn't say what they do; for fastening the craft itself, Kawasaki's manuals name only the bow and stern eyes. The supplier gives no maximum trailering speed for our cover. For the full question, see can you trailer a jet ski with the cover on, and for the trip itself, how to trailer a jet ski.
Trailerable Cover
AllGuard Weatherproof Shield Jet Ski Cover (Trailerable)
Trailerable, water-resistant two-tone cover, P0 to P6: P5 for the 140.9 in Ultras, P4 for the 2027 STX, P3 for the ST 160, P2 for the SX-R 160. STX 160LX and ST 160: measure to confirm.
4 colors: Blue / Black, Gray / Black, Red / Black, Yellow / Black
$139.99
Shop size P5Kawasaki sells its own covers, four of the five below under the Vacu-Hold name, and matches them by model and year: each accessory page lists compatible models, and the five pages we read give no length in inches. Our covers are matched by one number, the craft's overall length, bow to stern. Here is what Kawasaki's US site lists for five of its covers.
| Kawasaki cover (item #) | Compatible models Kawasaki lists | Features Kawasaki lists | MSRP |
|---|---|---|---|
| Vacu-Hold, Ultra 310LX/310LX-S/160LX/160LX-S, Silver (99994-1864) | Ultra 160LX and 160LX-S 2023 and 2025–2027; Ultra 160LX-S Wakesport 2027; Ultra 310LX and 310LX-S 2023–2027; Ultra 310X 2023, 2025 and 2027 with Ultra Deck (99994-1704) installed | Vacuum-vented trailering system; zippered openings for access to tie down cleats; Sur Last solution dyed polyester; water repellent | $404.88 |
| Vacu-Hold, Ultra 310X, Silver (99994-1698) | Ultra 310X 2022–2025 and 2027; does not fit with Ultra Deck (99994-1704) installed | Vacuum-vented trailering system; zippered openings for access to tie down cleats; Sur Last solution dyed polyester; water repellent | $364.69 |
| Jet Ski STX 160 Cover - Extended Deck (99994-2391) | STX 160LX and STX 160X 2026–2027 | Vacuum-vented trailering system; lower front hull section; Sur Last solution dyed polyester | $336.00 |
| Vacu-Hold, STX/STX-15F, Silver (W99995-470B) | STX 2009–2010; STX-15F, years listed from 2004 to 2019 | Vacuum-vented trailering system; lower front hull section; Sur Last solution dyed polyester; zippered fuel filler opening | $353.60 |
| Vacu-Hold, SX-R, Green/Black (W99995-474A) | SX-R 2017–2023; SX-R 160 2024 | Vacuum-vented trailer system; lower front hull section; zippered fuel filler opening; Sur Last solution dyed polyester | $247.94 |
These are Kawasaki's descriptions of its own covers. Kawasaki also lists the 99994-1864 and 99994-1698 as "Ultra-violet, mildew, and rot resistant," and the pages for 99994-1864, 99994-1698, W99995-470B and W99995-474A list a "Limited 2 year warranty against fading, bleeding, and manufacturer's defects." Kawasaki UK says of the Vacu-Hold trailering system: "This unique patented design allows your JET SKI watercraft to be trailered at highway speeds with no hold down." None of the five covers above lists the ST 160, the STX 310R or 310RX, or the Ultra 160LX Adventure or 160LX-S Angler.
Our Weatherproof Shield comes in seven sizes, P0 (up to 90 in) to P6 (up to 160 in). The Satin Shield comes in two, PWC2 and PWC3. The Weatherproof Shield is two-tone 600D solution-dyed polyester with a polyurethane-coated back, water-resistant, with an elastic hem cord, built-in buckles and straps, air vents to aid trailering, a mesh storage bag and an extra strap set. It comes in four colorways: Blue/Black, Gray/Black, Red/Black and Yellow/Black. The Satin Shield comes in black, with a satin storage bag included. Each carries a Lifetime warranty. See all our jet ski covers, or go to the Weatherproof Shield or the Satin Shield.
It depends on the model year. Kawasaki lists the 2026 Ultra 310LX and 310LX-S, the 2027 Ultra 160LX models and the 2025 Ultra 160LX-S Angler at 140.9 in, which is a P5. Kawasaki's MY2022–2025 spec sheets put the Ultra 310X at 135.4 in, 0.4 in over the P4/P5 line, so measure to confirm between P5 and P4. The MY2020–2021 sheets list the Ultra 310LX, Ultra LX and Ultra 310X at 132.7 in, a P4. Our data has no published length for the 2026–2027 Ultra 310X, so measure that one bow to stern.
Kawasaki lists the 2027 STX 160X, 160R, 310R and 310RX at 130.3 in, a P4. The 2027 STX 160LX and 160LX-S are 134.6 in, also a P4 but 0.4 in under the P5 line, so measure to confirm. The older STX-15F is 122.8 in on Kawasaki's archived 2019 page, a P3. Indoors, all of these take the Satin Shield in PWC3.
For the Weatherproof Shield, stand-ups size by measured length like any other craft. Kawasaki lists the 2027 SX-R 160 at 104.5 in, which is a P2 (102 to 115 in), and its archived 2022 page gives the SX-R (1500) the same 104.5 in. For indoor storage of a stand-up, contact us about the Satin Shield.
No, not ours. The Weatherproof Shield is water-resistant: two-tone 600D polyester with a polyurethane-coated back. Kawasaki's US pages list two of its Vacu-Hold covers, 99994-1864 and 99994-1698, as water repellent. Either way, Kawasaki's 2026 STX manual warns that if the watercraft is left outside, even covered, water can collect in the footwells on either side of the seat.
Not on the 2026 Ultra 310LX and 310LX-S, the 2027 Ultra 160LX models or the 2025 Ultra 160LX-S Angler: Kawasaki lists them 2.9 in over the Satin Shield's 138 in limit, so they do not fit any Satin Shield size. Ultras on the MY2020–2021 sheets (132.7 in) and the MY2022–2025 Ultra 310X (135.4 in) are under that limit and take PWC3. The Satin Shield is an indoor cover only.
They are matched differently. Kawasaki lists each of its covers for specific models and years, and the pages we read give no length in inches. Our covers are sized by the craft's overall length, bow to stern. Kawasaki's MSRPs are in the table above, with the date we read them.
Yes. Kawasaki's 2026 STX 160LX/160X and Ultra 310LX/310LX-S owner's manuals say to cover the watercraft and store it in a clean, dry place. The STX manual also says to remove the seats and open the inspection vent hatch for ventilation, and both manuals say that if the craft is left on a trailer, raise the trailer tongue so water cannot accumulate in the footwells.
Kawasaki's 2026 STX 160 and Ultra 310LX manuals don't say; their Transporting sections have no cover statement. Kawasaki UK says its own Vacu-Hold design allows its craft to be trailered at highway speeds with no hold down. Our Weatherproof Shield is sold as trailerable, with air vents to aid trailering, and the supplier gives no maximum trailering speed. Our guide to trailering a jet ski with the cover on has more.
Our covers go by overall length, bow to stern. Match your measured length in the size guide.
Measure your jet ski bow to stern in a straight line, then enter the length in inches.