Care

How to Fold and Store Your Jet Ski Cover

Dry it fully, flatten it, roll it up and pack it in its storage bag. Then keep it somewhere cool, clean and dry, preferably indoors.

By Alex Quinn 4 min read

A red and black jet ski cover rolled up tightly on a garage shelf

To store a jet ski cover, make sure it's completely dry, flatten it, roll it up tightly and pack it in its storage bag. Then keep the bag somewhere cool, clean and dry, preferably indoors. Don't bunch the cover up and toss it in a corner.

This page is about the cover itself once it's off the jet ski, for example through the riding season. Below: taking it off and drying it, folding and rolling it, the bag that comes with each cover, where to keep it, and getting it ready to go back on.

Take it off and make sure it's dry

On the Weatherproof Shield, undo the built-in buckles and straps before you lift the cover off. The Satin Shield is an indoor cover with no straps. We don't publish a set order for taking either cover off.

Store the cover only when it's completely dry, inside and out. If it's wet from rain or a wash, spread it out or hang it on a clothesline and let it air dry fully first. Never put it in a clothes dryer. If it's dirty, wash it before you put it away; our guide on how to wash and care for your jet ski cover has the steps.

How to fold and roll your cover

Folded and rolled neatly, the cover stays a manageable size and doesn't take up much space. Do it somewhere clean, so it doesn't pick up dirt on the way into its bag.

Fold and roll your jet ski cover

  1. Step 1: Find a clean, open spot

    Take the cover to a large, open area where it won't pick up dirt, grass or debris.

  2. Step 2: Fold it in half lengthwise

    Lay the cover out flat and fold it in half along its length.

  3. Step 3: Press out the air

    Smooth the cover flat with your hands, pressing the air out of it.

  4. Step 4: Roll it up tightly

    Roll it tightly from one end to the other, pressing out air as you go, much as you would roll up a tent.

    Hands rolling a folded gray and black cover tightly from one end on a clean garage floor
  5. Step 5: Or fold it compact

    If that's easier for your size of cover, fold it neatly into a compact bundle instead.

  6. Step 6: Bag it

    Put the rolled or folded cover in its storage bag.

The storage bag for each cover

Each of our jet ski covers comes with its own storage bag:

Weatherproof Shield: from the supplier's product sheet dated 2026-09-15. Satin Shield: the storage bag is confirmed by our operations team.
CoverWhat's included
Weatherproof Shield (trailerable)Mesh storage bag and extra strap set included
Satin Shield (indoor)Satin storage bag included

If you've lost the storage bag, contact us. Both covers carry a Lifetime warranty, and both are on the jet ski covers page.

Trailerable Cover

AllGuard Weatherproof Shield Jet Ski Cover (Trailerable)

Comes with a mesh storage bag and an extra strap set. Water-resistant 600D solution-dyed polyester with built-in buckles and straps.

4 colors: Blue / Black, Gray / Black, Red / Black, Yellow / Black

  • Under 90 inP0
  • Under 102 inP1
  • Under 115 inP2
  • Under 125 inP3
  • Under 135 inP4
  • Under 145 inP5
  • Up to 160 inP6

Lifetime Warranty

Where to store your cover

Keep the bagged cover somewhere cool, clean and dry, preferably indoors, such as a garage shelf or a closet.

If a stored cover smells musty when you take it out, hang it up and let it air dry fully before you use it. We don't publish a mold removal method; if you find mold on your cover, contact us.

Getting it ready to go back on

When the cover comes out of storage, shake off any dust or go over it with a vacuum cleaner, and wash it if it needs it. Fit it only on a clean, dry jet ski once the exhaust has cooled: how to put on a jet ski cover has more.

For water that collects on a covered jet ski, in the footwells or on top of the cover, see water pooling and moisture under your cover. More answers are in our help center.

Folding and storing FAQ

Lay it flat in a clean, open spot, fold it in half lengthwise, press the air out with your hands, and roll it up tightly from one end. Then put it in its storage bag.

Find Your Size

Measure your jet ski bow to stern in a straight line, then enter the length in inches.

  1. Under 90 inP0
  2. Under 102 inP1
  3. Under 115 inP2
  4. Under 125 inP3
  5. Under 135 inP4
  6. Under 145 inP5
  7. Up to 160 inP6
Full Size Guide

In inches. Decimals are fine.

Covers for Your Jet Ski

All Covers