Sizing

Between Two Jet Ski Cover Sizes? Size Up

Every cover size lists the longest jet ski it fits. If your measurement lands on a size line, or your readings fall on both sides of one, choose the larger size.

By Alex Quinn 7 min read

A jet ski under a yellow and black cover on its trailer in a driveway, a tape measure stretched out on the concrete beside it

If your jet ski is between two cover sizes, choose the larger one. That's our rule for both of our covers.

Every size lists the longest craft it fits, by overall length measured bow to stern. A jet ski that measures even a little over a size's top number already takes the next size up. Being between two sizes is the closer call: your measurement lands right on a line, your readings fall on both sides of one, or you're going by a published length within 1 in of a line. Below: how the size lines work, how to measure again, which current models sit near a line, the Satin Shield's limits, and when to contact us instead.

How the size lines work

Our covers are sized by one number: your jet ski's overall length, a straight line from the farthest point at the bow to the farthest point at the stern. Each size label shows the lengths it fits, and the top number is the maximum.

Cover Sizes by Overall Length, Bow to Stern
Overall LengthSizeCoverShop
Under 90 in P0 Weatherproof Shield Trailerable Shop P0 in the Weatherproof Shield
Under 102 in P11 seater Weatherproof Shield Trailerable Shop P1 in the Weatherproof Shield
Under 115 in P21–2 seater Weatherproof Shield Trailerable Shop P2 in the Weatherproof Shield
Under 125 in P32 seater Weatherproof Shield Trailerable Shop P3 in the Weatherproof Shield
Under 135 in P43 seater Weatherproof Shield Trailerable Shop P4 in the Weatherproof Shield
Under 145 in P53 seater+ Weatherproof Shield Trailerable Shop P5 in the Weatherproof Shield
Up to 160 in P63 seater+ Weatherproof Shield Trailerable Shop P6 in the Weatherproof Shield
Under 117 in PWC22–3 seater Satin Shield Indoor Shop PWC2 in the Satin Shield
Up to 138 in PWC33–4 seater Satin Shield Indoor Shop PWC3 in the Satin Shield

Measure bow to stern in a straight line. Within 1 in of a size line? Measure again before you order.

A size line is where one size ends and the next begins. For the Weatherproof Shield the lines are at 90, 102, 115, 125, 135 and 145 in, and the largest size tops out at 160 in. For the Satin Shield the line is at 117 in, and PWC3 tops out at 138 in. A jet ski that measures 125.5 in is over the 125 in line, so it takes P4 - 125 to 135 in. Use the size finder below, or the jet ski cover size guide, to match your length.

Find your size by length

Enter your measured overall length in inches.

  1. Under 90 inP0
  2. Under 102 inP1
  3. Under 115 inP2
  4. Under 125 inP3
  5. Under 135 inP4
  6. Under 145 inP5
  7. Up to 160 inP6
Full Size Guide

In inches. Decimals are fine.

What counts as between two sizes

Choose the larger size in any of these cases:

  • Your measurement lands on a line. If your tape reads exactly 125 in, choose P4 rather than P3.
  • Your readings fall on both sides of a line. If one reading is 134.5 in and the next is 135.5 in, choose P5. This matches our measuring rule: when two readings differ, use the longer one.
  • You can't measure, and the published length is within 1 in of a line. Published lengths can vary by model year and trim, and lengths given in feet and inches give whole inches only. If you can't check with a tape measure, choose the larger size.

If your longest reading is under a line, even by a little, the smaller size fits your length, and the size finder gives it.

Measure again before you choose

Near a line, take a second and a third reading. Our guide to how to measure a jet ski for a cover has the full method. The short version:

Re-check a close measurement

  1. Step 1: Park it level

    Put the craft on its trailer or a flat floor with the bow pointing straight ahead, and fold any reboarding step the way it's stored.

  2. Step 2: Count everything that stays on

    Measure to whatever sticks out farthest at each end: the bow or front bumper, and the swim platform, rear bumper, tow hook or any accessory that stays on under the cover.

  3. Step 3: Keep the tape straight and level

    Mark both end points on the ground and measure between the marks, or run the tape level along the side of the hull. Never run it over the seat or handlebars.

  4. Step 4: Take three readings

    Write each one down in inches without rounding down. If they differ, use the longest.

  5. Step 5: Apply the rule

    Over a line, on a line, or readings on both sides of one: choose the larger size.

Models that sit near a size line

These eight current models from our sourced list of manufacturer lengths sit within 1 in of a size line. It isn't a complete list: other models and trims can sit near a line too. Treat each one as a measure-to-confirm case: check your own craft with a tape measure, with everything that stays mounted, and if the result lands on a line or straddles one, choose the larger size.

Published Overall Lengths and the Matching Cover Size
ModelOverall LengthTrailerable SizeIndoor SizeSource
Sea-Doo GTX2027 135.8 in P5Measure to confirm PWC3 Spec page for the Sea-Doo GTX on sea-doo.brp.com (opens in a new tab)
Sea-Doo RXT-X2027 135.8 in P5Measure to confirm PWC3 Spec page for the Sea-Doo RXT-X on sea-doo.brp.com (opens in a new tab)
Sea-Doo Wake Pro2027 135.8 in P5Measure to confirm PWC3 Spec page for the Sea-Doo Wake Pro on sea-doo.brp.com (opens in a new tab)
Yamaha JetBlaster2027 116 in P3Measure to confirm PWC2Measure to confirm Spec page for the Yamaha JetBlaster on yamahawaverunners.com (opens in a new tab)
Yamaha JetBlaster DLX 3-Up2027 117 in P3 PWC3Measure to confirm Spec page for the Yamaha JetBlaster DLX 3-Up on yamahawaverunners.com (opens in a new tab)
Yamaha FX HO2027 139 in P5 Over 138 in Spec page for the Yamaha FX HO on yamahawaverunners.com (opens in a new tab)
Kawasaki STX 160LX2027 134.6 in P4Measure to confirm PWC3 Spec page for the Kawasaki STX 160LX on kawasaki.com (opens in a new tab)
Kawasaki ST 160 / ST 160X2027 124.1 in P3Measure to confirm PWC3 Spec page for the Kawasaki ST 160 / ST 160X on kawasaki.com (opens in a new tab)

Lengths are the manufacturers' published figures. Your measured length is what counts, and "measure to confirm" marks lengths within 1 in of a size line.

Kawasaki lists the 2027 STX 160LX at 134.6 in, 0.4 in under the 135 in line. That's P4 by its published length, but measure yours, and if you get 135 in or more, choose P5.

Three of these sit near a Satin Shield line. Yamaha lists the 2027 JetBlaster at 9 ft 8 in (116 in), 1 in under the 117 in line between PWC2 and PWC3, and the 2027 JetBlaster DLX 3-Up at 9 ft 9 in (117 in), right on it. Yamaha lists the 2027 FX HO at 11 ft 7 in (139 in), 1 in over the Satin Shield's 138 in maximum, so the Satin Shield isn't offered at that length.

Between the two Satin Shield sizes

The Satin Shield indoor cover comes in two sizes: PWC2 - 2-3 Seater, up to 117 in, and PWC3 - 3-4 Seater, up to 138 in. Choose by measured length, not by the seat count in the name. The same rule applies: if you're between PWC2 and PWC3, choose PWC3.

There's no Satin Shield size above PWC3. If your jet ski measures more than 138 in, choose the Weatherproof Shield instead; its sizes run to 160 in. If you measure right on 138 in, choose PWC3.

Note

Stand-up jet skis and the Satin Shield

We don't list a Satin Shield size for stand-up jet skis yet, so contact us before you order one for a stand-up. The Weatherproof Shield sizes stand-ups by overall length, the same as any other jet ski.

Trailerable Cover

AllGuard Weatherproof Shield Jet Ski Cover (Trailerable)

Seven sizes, P0 to P6, each labeled with the longest jet ski it fits, up to 160 in. Water-resistant, with an elastic hem cord and built-in buckles and straps.

4 colors: Blue / Black, Gray / Black, Red / Black, Yellow / Black

  • Under 90 inP0
  • Under 102 inP1
  • Under 115 inP2
  • Under 125 inP3
  • Under 135 inP4
  • Under 145 inP5
  • Up to 160 inP6

Lifetime Warranty

When to contact us instead

The size-up rule covers the cases above. Contact us with your measurement and your make, model and year before you order if:

  • your jet ski is a stand-up and you want the Satin Shield;
  • it measures more than 160 in, past the largest Weatherproof Shield size;
  • it carries something unusually tall or wide, such as a tow tower, a tall rack or wide sponsons.

If you've already ordered and the size is wrong, see returns and size exchanges. More answers are in our help center.

Between two sizes: common questions

Size up. If your jet ski is between two cover sizes, choose the larger one. Measure first: if your length lands on a size line, or your readings fall on both sides of one, take the larger size.