Fitting

Will the Cover Fit with Accessories Installed?

The honest answer first: we don't publish accessory fit notes yet. Here's how sizing works with add-ons on board, what Yamaha and Sea-Doo say about their own parts, and how to ask us about your craft.

By Alex Quinn 7 min read

A sit-down jet ski under a loose red and black Weatherproof Shield cover on its trailer in a tidy garage, seen from the front three-quarter angle

We can't confirm that yet. We don't publish notes on whether either of our covers fits over a specific add-on, such as a Yamaha RecDeck, Sea-Doo LinQ gear or a ski pylon, and our supplier hasn't given us any. So this page sticks to what we can say today: how sizing works with accessories on board, what Yamaha and Sea-Doo publish about their own parts, and what to send us about your craft before you order.

What we can say about sizing with add-ons

Here is how our sizing rules apply with accessories on board. Each rule has its own page, so here they are in brief:

  • Length picks the size. Both covers go by overall length only. The Weatherproof Shield comes in seven sizes, P0 to P6. The Satin Shield, our indoor cover, comes in PWC2 (up to 117 in) and PWC3 (up to 138 in). The size guide has every band.
  • Measure the craft as it will be stored. Count whatever stays mounted under the cover; a rear accessory can be the farthest point at the stern. Leave out coolers, caddies, bags or racks that you take off before covering. Our guide on how to measure a jet ski for a cover has the method.
  • On or over a size line, size up. If the measured length falls exactly on the line between two sizes, or even slightly over a line, choose the larger size. The rule is about the measured length, not the accessory. Details: between two cover sizes.
  • Tall or wide add-ons: ask first. Our measuring guide notes that tall add-ons affect more than length. If your craft carries a tow tower or ski pylon, a tall rack or wide sponsons, contact us before you order and include their measurements.
  • Mirrors and the Satin Shield. Mirrors come standard on some craft (Yamaha's VX page lists dual mirrors). Our supplier's sheet says the Satin Shield has no mirror pockets. We can't yet confirm whether either cover fits over mirrors. We don't offer a Satin Shield size for stand-up craft yet; contact us about a stand-up.

What we can't confirm yet

Some answers we can't give yet. Our supplier hasn't answered our accessory-fit questions, and we have no date for when it will. Until then, ask us about your craft through our contact page.

Note

Open questions on our side

We can't yet confirm whether either cover fits over: a Yamaha RecDeck, with or without a rack or package on it; Sea-Doo LinQ racks, coolers, fuel caddies or bags; a tow tower or ski pylon; a wakeboard rack; sponsons; or mirrors. We also don't publish a cover height or clearance figure for any size. Contact us about your craft before you order.

Trailerable Cover

AllGuard Weatherproof Shield Jet Ski Cover (Trailerable)

Sized by overall length, with an elastic hem cord, built-in buckles and straps, and air vents to aid trailering.

4 colors: Blue / Black, Gray / Black, Red / Black, Yellow / Black

  • Under 90 inP0
  • Under 102 inP1
  • Under 115 inP2
  • Under 125 inP3
  • Under 135 inP4
  • Under 145 inP5
  • Up to 160 inP6

Lifetime Warranty

RecDeck, LinQ and other add-ons, per their makers

If you're shopping for a WaveRunner cover for a VX with a RecDeck, or for a Sea-Doo with LinQ accessories, here is what Yamaha and Sea-Doo publish about some of their own add-ons. The figures describe each accessory on its own. They don't tell you whether a cover clears it, and we don't add them to a craft's length to pick a size.

Each maker's own figures for the accessory itself, not cover clearance; we don't add them to a craft's length to pick a size. Sea-Doo rows: MY24 US spec book, the newest US Sea-Doo accessory book we read. Read 2026-10-30.
AccessoryMaker and sourceWhere it mountsSize the maker gives
Yamaha RecDeck (fits 2019-on FX, 2021-on VX/GP)Yamaha: RecDeck product page; VX page; 2021 FX releaseThe stern: integrates with the swim platform and reboarding ladder; its cleats accept a Multi-Use Rack (2021 release)None in the Yamaha pages we read
LinQ Retractable Ski PylonSea-Doo: 2024 (MY24) US spec book, p. 54Not stated in the pages we readNo height given; Sea-Doo calls it high-rise and says it retracts when not in use
Wakeboard RackSea-Doo: 2024 spec book, p. 54Onboard; each rack holds one wakeboardNone given for the rack
Rear Deck Extension with LinQSea-Doo: 2024 spec book, p. 49Off the stern; compatible with the LadderExtends an extra 11.5 in off the stern
LinQ Multi Cargo RackSea-Doo: 2024 spec book, p. 49Not stated; adds up to three times the available LinQ accessory positionsNone given for the rack
LinQ 3.8 US gal (14.5 L) Stackable Fuel CaddySea-Doo: 2024 spec book, p. 48A LinQ position; exact spot not stated13 in L x 19 in W x 9 in H
LinQ 5 US gal (20 L) Fuel CaddySea-Doo: 2024 spec book, p. 48A LinQ position; exact spot not stated12 in L x 19 in W x 12 in H
LinQ 13.5 US gal (51 L) CoolerSea-Doo: 2024 spec book, p. 50A LinQ position; exact spot not statedExterior 19 in L x 31.5 in W x 16.5 in H
LinQ 4.2 US gal (16 L) CoolerSea-Doo: 2024 spec book, p. 50A LinQ position; exact spot not statedExterior 13 in L x 20 in W x 10 in H

Sea-Doo's own figures don't all treat add-ons the same way. Its 2027 Wake Pro page gives the craft's width as 49.4 in "w/o rack," and the same page lists a LinQ retractable ski pylon and a board rack among the model's features. On the 2027 FishPro Sport, Sea-Doo's spec sheet lists the Rear Deck Extension with LinQ as a key feature and says its total storage capacity includes the LinQ fishing cooler. So measure your own craft as it will sit under the cover instead of relying on a published figure; our measuring guide shows how.

What to send us before you order

If your craft has accessories you plan to leave on, contact us before you order and include the details below.

What to send us

A hand holding a tape measure level along the side of an uncovered jet ski on a trailer, from the stern below a plain cooler on the rear deck

Already ordered and it doesn't fit?

Check returns and size exchanges for how to swap or return a cover, or contact us with your order number and follow the instructions you receive. For putting a cover on in general, see how to put on a jet ski cover; it doesn't cover fitting around accessories. Other questions: our help center.

Accessory fit FAQ

We can't confirm that yet. Yamaha says the RecDeck integrates with the swim platform and reboarding ladder at the stern, but the Yamaha pages we read give no dimensions for it, and our supplier hasn't sent fit notes for it. Measure your craft's overall length with everything that stays mounted, then contact us with that length, your make, model and year, and what's on the deck before you order.

Have your measured length?

Match your craft's overall length, with everything that stays mounted, to a size in the size guide. Leaving accessories on? Contact us before you order.

Open the size guide

Find Your Size

Measure your jet ski bow to stern in a straight line, then enter the length in inches.

  1. Under 90 inP0
  2. Under 102 inP1
  3. Under 115 inP2
  4. Under 125 inP3
  5. Under 135 inP4
  6. Under 145 inP5
  7. Up to 160 inP6
Full Size Guide

In inches. Decimals are fine.

Covers for Your Jet Ski

All Covers