AllGuard Weatherproof Shield
Outdoor storage and trailering
$139.99
Lifetime WarrantyCovers
A cover isn't a sealed box, but for a jet ski that sits outdoors or rides a trailer, it helps keep rain and debris off the craft. Here is the honest case for and against, from Sea-Doo, Yamaha and BoatUS guidance.
Yes, if your jet ski is stored outdoors or travels on a trailer. A cover can help keep rain, leaves, dust and direct sun off the deck and seat while the craft sits, Public Storage's boat-storage advice says, and the makers' own storage advice includes one. In a garage a cover matters less, but it can still help limit dust and debris.
Yamaha's 2021 maintenance guide says to store a WaveRunner indoors or under a shelter when possible and, when outdoor storage is the only option, to consider a cover during poor weather and extreme sun exposure. Sea-Doo's winterizing guide ends its storage steps the same way: cover the craft with a breathable, fitted cover and keep it in a dry, ventilated place.
A cover has limits, too. It isn't watertight, and Public Storage says to let a boat dry fully before covering it. Below: what a cover does, where it matters most, when to be careful, whether new jet skis come with one, how maker covers compare with aftermarket ones, and how to pick a size.
The short answer
A cover is a barrier between the craft and whatever lands on it while it's parked. Here is what that barrier is for, according to the manufacturers and boating groups.
Rain on an open jet ski lands on the seat and collects in the footwells. Yamaha's 2021 maintenance guide lists water collecting in footwells among the problems outdoor exposure causes, and says pooled footwell water should be removed as soon as possible to prevent damage to paint (such as osmotic blistering), graphics and traction mats. Discover Boating says a boat stored outdoors over the winter needs shrink-wrap, a storage canopy or a secure cover to prevent water intrusion and weathering.
Yamaha says WaveRunners are susceptible to damage from sun, rain, snow and dust, from plastic discoloring and hardening to painted or treated surfaces fading. Its guide to choosing a cover adds that craft left out in the elements lose their color and shine, and that their vinyl and fabrics age quickly. Sea-Doo's 2026 operator's guide for the GTI, GTR and Wake series says never to leave the watercraft stored in direct sunlight. Public Storage adds that for outdoor storage a cover can help limit direct sun exposure on seating and exterior finishes, and Sea-Doo's operator's guides say to cover a craft stored outside with an opaque tarpaulin to keep sun rays and grime off its plastic components and finish.
Public Storage's boat-storage advice says a fitted, breathable cover can help limit dust, leaves, rain and debris while letting air move around the boat. BoatUS's 2021 winterizing guide, writing about boat covers in general, says a well-supported cover keeps leaves and debris from clogging drains and protects the deck from pooling water.
Sea-Doo's 2024 Spark operator's guide says a Sea-Doo cover can protect the watercraft while trailering, particularly on dirt roads, by keeping dirt from entering through the air inlet openings. Yamaha's maintenance guide also tells owners to protect a WaveRunner from the elements with a storage cover when it's not in use or when trailering.

No. A cover isn't watertight. Yamaha's guide to choosing a cover says quality cover fabrics breathe and let moisture escape from underneath, which it calls key to preventing condensation under the cover and avoiding mold, mildew and corrosion. BoatUS says a storage cover should, at a minimum, be strong, breathable and water-resistant, with enough ventilation to protect against mold and mildew.
That answers a question owners ask on forums: what is the point of a cover if the craft can still get wet? A cover keeps weather off, but not all of it. Yamaha's 2021 maintenance guide notes that even units with factory covers installed can collect water in the footwells when stored outdoors, and tells owners to check and drain the footwells at least twice a month. It also suggests raising the bow of a trailered craft that has no footwell drains, so water runs out, and keeping a craft that has footwell drains horizontal, with the drain holes clear. Yamaha's 2026 owner's manuals say to store the craft upright in a horizontal position, or fuel could leak and create a fire hazard, and Kawasaki's 2026 STX 160 owner's manual says that if the craft is left on a trailer, raise the trailer tongue so water can't collect in the footwells. Follow your owner's manual.
Our Weatherproof Shield is made of 600D solution-dyed polyester with a PU coating: a water-resistant fabric, not a sealed shell. For what to expect in a downpour or snow, see using your cover in rain and snow, and for water that does reach the hull, our guide to water in a jet ski hull.
How much a cover matters depends on where the jet ski spends its time between rides. Wherever it sits, the cover is the last step of storage prep, not a replacement for it: Sea-Doo's winterizing guide puts it eighth, after the jet pump, exhaust, fuel, oil, fogging, lubrication and battery steps. See how to winterize a jet ski, our jet ski storage guide and storing a jet ski outside.
| Where it sits | Cover it? | Why | Watch for |
|---|---|---|---|
| Outdoors on its trailer (driveway, yard, lot) | Yes | Yamaha's 2021 maintenance guide and Sea-Doo both point to a cover for outdoor storage | Water in the footwells after heavy rain; built-in buckles and straps fastened |
| On the trailer, on the road | Yes, with a trailerable cover | Sea-Doo's 2024 Spark guide says a cover can keep dirt out of the air inlets on dirt roads | Built-in buckles and straps fastened, no loose fabric |
| Carport or covered parking | Yes | Sea-Doo's covers page says that even in covered parking you'll want to protect the craft from scratches, falling debris and possible discoloration | The same checks as outdoors |
| Garage or enclosed storage unit | Optional, but useful | Can help limit dust and debris (Public Storage); Sea-Doo's storage steps end with a breathable, fitted cover | Put it on a dry craft |
| Between rides on the same day | Your call | Yamaha says to cover it when not in use; Sea-Doo's cover advice is about storage | Dry the seat and footwells before covering it for storage |

A cover can cause problems of its own when it's used the wrong way. Four to watch:
A breathable cover lets moisture escape, Yamaha's cover guide says, but Public Storage's advice is to let a boat dry fully before covering it. Yamaha's 2021 maintenance guide says to make sure every item and area is bone-dry before closing a craft up for storage, and after a rinse, to let the engine and seat air-dry completely before reinstalling the seat. Sea-Doo warns against wrapping a craft in plastic or other non-breathable materials, which can cause mold. If you cover a damp ski to get it home, let it dry out before it goes back under the cover for storage. Seat mold is its own topic: see how to get mold out of jet ski seats.
A plastic tarp is not a substitute. BoatUS says plastic tarps typically begin to shred after the first blow, leaving the boat unprotected, and that shrink-wrap, while very effective at keeping out rain and snow, traps moisture and causes mildew unless vents are used along the entire length of the cover. Sea-Doo's 2019 UK winterizing advice for outdoor storage calls for an opaque, breathable tarp or a Sea-Doo cover, and says not to wrap the craft in plastic or other non-breathable material.
On the road, wind is a risk. Yamaha's guide to choosing a cover warns that wind can work its way under a loose cover and cause flapping, which can damage the craft's paint, graphics or gelcoat, or even tear the cover free. It says the hem should carry an elastic shock cord, draw cord or strap, and that tie-down straps are necessary to keep a cover secure on the road, unless the cover uses a vacuum system instead. The Weatherproof Shield has built-in buckles and straps, an elastic hem cord and air vents to aid trailering. For more, see how to keep a cover from blowing off and can you trailer a jet ski with the cover on.
Slack fabric can sag into a pocket that holds rainwater. Yamaha's guide makes that point about covers that don't follow the craft's shape, and BoatUS says a custom boat cover should have a frame under it to prevent pooling. On a jet ski, Yamaha's point is about excess fabric, so start with a cover sized to the craft's length and fasten its built-in buckles and straps. More in water pooling and moisture under your cover.
Tip
Before you tow
Check that every built-in buckle is fastened and no loose fabric is left to catch the wind. Yamaha warns that a flapping cover can damage paint, graphics or gelcoat.
Some do. Sea-Doo, Yamaha and Kawasaki all sell covers as accessories, and some Limited trims have included one. What the makers' own pages say:
Packages change from year to year, so check the standard-equipment list for your exact model and year, or ask the selling dealer.
A maker's (OEM) cover comes from the craft's manufacturer and is made for a specific model or model family. Sea-Doo describes some of its covers as weather-resistant trailering covers that protect the watercraft during storage and trailering. Kawasaki lists its covers by model, including Vacu-Hold covers for the Ultra and the SX-R. If you want a cover made for one exact model, the maker's dealer is the place to ask.
Aftermarket covers come from other companies and are sized in different ways, some by model and some by length range. Yamaha's own guide to choosing a cover says a cover made for your model can come from the craft's manufacturer, an aftermarket supplier or a specialist fabricator, and lists what to look for in a cover: a close fit, breathable polyester fabric, strong double-stitched seams, reinforcement where the cover meets a protrusion, and a hem with an elastic cord or strap.
Our covers are aftermarket and sized by overall length rather than by model. The Weatherproof Shield comes in seven sizes, P0 to P6, and the Satin Shield indoor cover in two, PWC2 and PWC3. Each size has a maximum length, so the size whose range includes your measured length is the one to order.
| Question | Maker (OEM) cover | Our length-sized covers |
|---|---|---|
| How it's sized | For one model or model family | By the craft's overall length |
| How you find your size | Your make, model and year | Your measured length, matched in the size guide |
| Where it comes from | The maker's dealers; included with some Limited trims | Seven Weatherproof Shield sizes and two Satin Shield sizes |
Two decisions settle it: the size, from your craft's length, and the type, from where it's kept. Both of our covers are in the jet ski covers collection.
Measure the craft's overall length in a straight line, then match it to a size in the cover size guide. Our help article on how to measure a jet ski for a cover shows where to put the tape. If your length lands right at a size's limit, measure again, and see between two cover sizes.
Enter your measured overall length in inches.
Trailerable Cover
AllGuard Weatherproof Shield Jet Ski Cover (Trailerable)
For a jet ski stored outdoors or towed: built-in buckles and straps, an elastic hem cord and air vents to aid trailering. Seven sizes by overall length.
4 colors: Blue / Black, Gray / Black, Red / Black, Yellow / Black
$139.99
Shop the Weatherproof Shield
Indoor Cover
AllGuard Satin Shield Indoor Jet Ski Cover
For a garage or storage unit: an indoor stretch cover with a sheared fleece interior, for craft up to 138 inches overall.
Color: Black
$129.99
Shop the Satin ShieldBRP, Sea-Doo's maker, has its own advice on covers:
We size covers for Sea-Doo models the same way as for every other make: by overall length. Here are current Sea-Doo lengths from BRP's model pages and the size each one falls in. More models are on the Sea-Doo covers page.
| Model | Overall Length | Trailerable Size | Indoor Size | Source |
|---|---|---|---|---|
| Sea-Doo Explorer Pro2027 | 146.8 in | P6 | Over 138 in | Spec page for the Sea-Doo Explorer Pro on sea-doo.brp.com (opens in a new tab) |
| Sea-Doo GTX2027 | 135.8 in | P5Measure to confirm | PWC3 | Spec page for the Sea-Doo GTX on sea-doo.brp.com (opens in a new tab) |
| Sea-Doo Wake Pro2027 | 135.8 in | P5Measure to confirm | PWC3 | Spec page for the Sea-Doo Wake Pro on sea-doo.brp.com (opens in a new tab) |
| Sea-Doo GTI2027 | 130.7 in | P4 | PWC3 | Spec page for the Sea-Doo GTI on sea-doo.brp.com (opens in a new tab) |
| Sea-Doo RXP-X2027 | 130.6 in | P4 | PWC3 | Spec page for the Sea-Doo RXP-X on sea-doo.brp.com (opens in a new tab) |
Lengths are the manufacturers' published figures. Your measured length is what counts, and "measure to confirm" marks lengths within 1 in of a size line.
If it's stored outdoors or towed on a trailer, yes. Yamaha's 2021 maintenance guide recommends indoor or sheltered storage when possible and, when outdoor storage is the only option, a cover during poor weather and extreme sun exposure; Sea-Doo's storage steps end with a breathable, fitted cover. In a garage a cover is optional, but it can help limit dust and debris.
No. Our Weatherproof Shield is water-resistant, not waterproof. Water can still collect in the footwells, so Yamaha's 2021 maintenance guide advises checking and draining them at least twice a month when the craft is stored outdoors.
Some do. Sea-Doo, Yamaha and Kawasaki all sell covers as accessories, and some Limited trims have included one: Sea-Doo lists a watercraft cover in the 2027 GTX Limited package, and Yamaha's 2022 FX Limited SVHO came standard with an accessory package that included a matching cover. Check the standard-equipment list for your model year.
It isn't essential, but it can help limit dust and debris. Sea-Doo's storage steps end with a breathable, fitted cover in a dry, ventilated place, which a garage can be. Public Storage says to let a boat dry fully before covering it.
Yes, with a cover made for trailering. Fasten its built-in buckles and straps and leave no loose fabric for the wind to catch; Yamaha's guide to choosing a cover warns that a flapping cover can damage paint, graphics or gelcoat. Our Weatherproof Shield is the trailerable cover, with built-in buckles and straps and air vents to aid trailering.
For storage, yes. Public Storage says to let a boat dry fully before covering it. Yamaha's 2021 maintenance guide says every area should be bone-dry before a craft is closed up for storage, and Sea-Doo warns that non-breathable wraps can cause mold. Let the seat, footwells and engine area dry, then cover it.
Size by the craft's overall length. Measure it in a straight line, then match the length in the size guide. The Weatherproof Shield runs from P0, for craft up to 90 inches, to P6, up to 160 inches. The Satin Shield indoor cover comes in PWC2, up to 117 inches, and PWC3, up to 138 inches.
Covers are sized by overall length. Measure bow to stern, then match the number in the size guide.
Sizes go by overall length, bow to stern. The size guide has the full chart and how to measure.